Ewing Pools
Brands     

Explore Online Vendor Boutiques
Explore Latham In-ground Pools
Explore Trendium Above Grounds
Explore Hayward Pool Equipment
Explore Raypak Pool Heaters
Explore Zodiac Pool Cleaners
Explore IPG Water Treatment
Explore HPI Covers
Explore Sunrise Spas & Hot Tubs




   


Hot Tub Balancers



Please note: Not all products are in-stock and may require to be ordered. Please call store for inventory details.


Please note: Not all products are stocked and may require to be ordered. Please call store for inventory details.


<< Back

Hot Tub Balancers IPG Alkalinity Plus - Hot Tub (29-21980-11)


Alkalinity Plus - Hot Tub

Item ID: (29-21980-11)
Brand: IPG

ALKALINITY+
INCREASES ALKALINITY AND CONTROLS pH FLUCTUATION

Helps maintain balanced pH levels.
Insures better bather comfort.
Protects spa equipment.

1. Total alkalinity levels should be tested often and maintained in the range 100 to 150 ppm.
2. If level is below 100 ppm, add 20 g of ALKALINITY+ per 1,000L of spa water to raise alkalinity by 10 ppm.
3. Pour directly into spa water with the spa in operation.
4. Wait 15 minutes before using spa.

Total alkalinity is the measure of the ability of the water to resist changes in pH, it effects and controls the pH and is a pH buffer.
Low total alkalinity causes excessive pH fluctuation and can cause corrosion of spa surfaces and equipment.
The ideal range for Total Alkalinity is 125-150 ppm.
Test regularly and use when required.




Buy29-21980-11




Hot Tub Balancers IPG Alkalinity Minus - Hot Tub (29-21981-11 )


Alkalinity Minus - Hot Tub

Item ID: (29-21981-11 )
Brand: IPG

ALKALINITY-
ALKALINITY REDUCER

Helps reduce alkalinity in spa water to avoid scale formation.
Odourless, 100% soluble formula acts rapidly in hot water.
Does not influence total dissolved solids like regular granular formulas.

1. Maintain proper daily levels:
pH: 7.2-7.8
Alkalinity: 100-150 ppm
2. If levels are higher, add 60 mL of ALKALINITY- per 1,000 L of spa water to decrease pH 0.4 and alkalinity of 14 ppm.
3. Spa must be in operation before ALKALINITY-.
4. Wait 15 minutes and retest pH and alkalinity.
5. Repeat operation until recommended levels are reached.

TOTAL ALKALINITY:
Total alkalinity is the measure of the ability of the water to resist changes in pH, it effects and controls the pH and is a pH buffer.
High Total alkalinity makes the pH difficult to adjust and causes scale formation.
The ideal range for Total Alkalinity is 125-150 ppm.
Test regularly and use when required.




Buy29-21981-11




Hot Tub Balancers IPG Calcium Plus - Hot Tub (29-21501-50)


Calcium Plus - Hot Tub

Item ID: (29-21501-50)
Brand: IPG

CALCIUM+
HARDNESS INCREASER
29-21501

Ideal product to prevent and stop corrosion of equipment.
Concentrate liquid formula that does not leave powdery residue and provides quick results.

1. Hardness level should be tested often and maintained in the range of 100 to 200 ppm.
2. If level is below 100 ppm add 110 mL of CALCIUM+ per 1,000 L of spa water to raise hardness by 50 ppm.
3. Pour solution directly into spa water with the spa in operation.
4. Wait 15 minutes before using spa.

CALCIUM HARDNESS:
Hardness is the total dissolved mineral content of the spa water and is made up of mainly calcium and magnesium.
The ideal range for calcium hardness is 100-200 ppm.
Use on initial fill of spa or when required.
PRECAUTIONS:
Always add chemicals to water, NEVER add water to chemicals!
Carefully read and follow all label directions before use.
Never mix with other chemical.




Buy29-21501-50




Hot Tub Balancers IPG PH Plus - Hot Tub (29-21190-50)


PH Plus - Hot Tub

Item ID: (29-21190-50)
Brand: IPG

RAISES THE pH in Hot Water
To achieve maximum sanitizer efficiency and to avoid corrosion of surfaces, your water's pH should be between 7.2 and 7.8. Maintaining a balanced pH will ensure better bather’s comfort and protect spa equipment
Green formula
ECOLOGO Certified Pool and Spa Water Treatment Products CCD-171

1. To increase pH to recommended levels, add the required quantity of pH+ according to the chart below:
pH reading
For 1,000 L
Below 6.6
10 g
6.6 to 7.0
7.5 g
7.0 to 7.4
5 g
2. Pour directly pH+ into spa water with the spa in operation.
3. Wait 15 minutes and retest pH and alkalinity.
4. Repeat operation until recommended levels are reached.

PRECAUTIONS:
MAY IRRITATE EYES. Do not mix with any other chemical. Do not get in eyes. Keep out of reach of children.
FIRST AID TREATMENT:
Contains: sodium carbonate. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. 




Buy29-21190-50




Hot Tub Balancers IPG PH Minus - Hot Tub (29-21181-50)


PH Minus - Hot Tub

Item ID: (29-21181-50)
Brand: IPG

Helps reduce pH and alkalinity in spa water to avoid scale formation.
Odourless, 100% soluble formula acts rapidly in hot water.
Does not influence total dissolved solids like regular granular formulas.
Green formula
ECOLOGO Certified Pool and Spa Water Treatment Products CCD-171

1. Maintain proper daily levels:
pH: 7.2-7.8
Alkalinity: 100-150 ppm
2. If levels are higher, add 60 mL of pH- per 1,000 L of spa water to decrease pH 0.4 and alkalinity by 14 ppm.
3. Spa must be in operation before pH-.
4. Wait 15 minutes and retest pH and alkalinity.
5. Repeat operation until recommended levels are reached.

TOTAL ALKALINITY:
In order to balance the pH the Total Alkalinity must be balanced.
Total alkalinity is the measure of the ability of the water to resist changes in pH, it effects and controls the pH and is a pH buffer.
High Total alkalinity makes the pH difficult to adjust and causes scale formation.
The ideal range for Total Alkalinity is 125-150 ppm.
Test regularly and use when required.
 

PRECAUTIONS:
CAUSES BURNS.
DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS.
Always add chemicals to water, NEVER add water to chemicals!




Buy29-21181-50




 


your pool & hot tub experts

Ewing Pools has been a Family Tradition since 1968. Shawn, Craig and Kevin Ewing, and their expert staff make it Durham Region’s first choice for Inground Pools, Pool Renovations, Service and Supplies.

The Ewing Family’s reputation for high quality workmanship and excellent customer service has continued for 48 years.

We invite you to visit our 5000 square foot retail store, where you can see all of our products on display, such as pools, liners, automatic cleaners, filters, heaters, pumps, patio loungers, toys and more.
  pool & spa Supplies 

Pool filters in Whitby
Pool pumps in Whitby
Pool covers in Whitby
Pool chemicals in Whitby
Pool renovations in Whitby
Pool liners in Whitby
Pool heaters in Whitby


have a question? 

> ask our experts
> customer concerns  
> book servicing
> view website sitemap 

get in touch 


Showroom
513 Brock Street North,
Whitby, Ontario, L1N 4J1
Tel: 905-430-1884